Qualitative Cellulose Filters

Qualitative cellulose filter papers perform separation by entrapping particulate within the random matrix of cellulose fibers within the depth of the media. This media is widely used in methods requiring the determination and identification of particulate in both liquids and gas. Also, this natural fiber filter paper is commonly used to clarify liquid samples.

________________________________________________________________

CFP1: Widely used filter media demonstrating a retention rate approximate to 11μm, with medium flow rate. Used in a broad range of laboratory and environmental applications, this media is ideally suited in separating lead sulfate, calcium carbonate and calcium oxalate precipitates. This media is the standard for agricultural procedures such as soil and seed sample testing. Also, it is commonly used as a separation media in the food and beverage industry to extract liquids from solid samples. Due to the consistent bright white color of this media, it is ideal for photometric stain intensity measurement of air samples. The media can also be impregnated with reagents for use in quantifying optical reflectance in gas detection procedures.

CFP2: A more retentive and absorbent media than CFP1, with approximately 8μm and a medium to slow flow rate. This media is ideal for general filtration and absorbent conveyance. Commonly used in plant growth trials and monitoring preisolated contaminants in air and gas.

CFP3: Practically identical to CFP1, but twice as thick resulting in a significantly slower flow rate with a retention of approximately 6μm. This media does not clog as easily as the other qualitative cellulose types, which allows for much higher sample volume usage. This media also demonstrates very high levels of absorbency, permitting the media to be used as a sample conveyance substrate.

CFP4: The fastest flow rate demonstrated by any of the qualitative cellulose filter media’s resulting in a low retention rate of approximately 20-26μm. Very commonly used as the first media in a multi-stage filtration process. Ideally suited for use in organic extractions and biological fluid separation processes. Often specified in air monitoring applications where the entrapment of fine particulate is not required.

CFP5: Filtration of very fine particulate and clarification with applications in environmental sciences and chemical analysis.

CFP6: Very similar basis weight and thickness to CFP5, but with a slightly less retentive porosity. Also, due to the furnish of this paper, the ash content is higher than the balance of the qualitative line. Material is commonly specified in environmental applications.

Qualitative Filter Selection:

Standard Diameter Sizes Offered

25mm	42mm	47mm	55mm
70mm	90mm	110mm	125mm
150mm	185mm	240mm	320mm

Filter Media	Retention	Flow
CFP1	11µm	Medium
CFP2	8µm	Medium - Slow
CFP3	6µm	Slow
CFP4	20 - 26µm	Fast
CFP5	2.5µm	Slow
CFP6	3-4µm	Slow

SSI Products, LLC

Qualitative Cellulose Filters

SSI Products, LLC

Quantitative Cellulose Filters